MetaBlog links for this story.

Naturally, if you're designing a different shape of box, you'll want to lay out a different set of shapes at this stage.
This box has a reinforced bottom which keeps the rectangle neatly squared, and an insert which the lid fits over. Cut the shapes out of paperboard and score them about halfway through where the folds will be. Not scoring evenly can lead to slightly crooked folds.
Next, cut your tissue paper to shape. This is easiest to do while your paperboard is still flat. The lid can be wrapped much like a present, so you will need a piece brochure printing slightly larger than the paperboard laid out flat. The outer piece of the base will need to be completely lined, requiring a strip that is again, slightly larger than the paperboard. The inner piece of the base only needs to be lined about halfway down.

Tack your paperboard pieces together with tape, and then wrap with tissue paper. Tack the tissue down with tape in a location that will be covered by the decorative paper or by another layer of paperboard. Fold the tissue neatly over the corners (you can use a letter opener to press it into the creases). Loosen the tissue paper enough to smear a thin layer of glue under the edge on the inside of the box, then smooth the tissue paper back down onto the glue. I used my finger to apply the glue, but you can use a cotton swab, toothpick, or whatever is handy.
Put a bead of glue around the bottom edge of the outer base piece and insert the reinforcing base piece. Clamp together and allow to dry.
Also put a bead of glue around the upper edge of the outer base piece and insert the base liner. Clamp, and allow to dry.
While you're waiting for all that glue to dry, you can cut out your paper. Each piece should be slightly smaller than the facet it will be placed on. In this case, the border is about 1/16".
Put out a blob of glue on your palette (or a scrap of paperboard) and spread it evenly and all the way to the edges on your first piece. Place it on the matching facet of the box. Repeat until all facets are finished.
That's it, congratulations, you've made a cardboard box classy little paper box!
You can now sit back and admire it, or put it to work holding something, or give it away as a gift, or start all over again with a new box design and a new color of paper.
MetaBlog links for this story: [ del.icio.us | technorati ]
Technorati tags: art, diy, howto, make, instructions, tutorial, boxes, containers, decorations, craft, art, papercraft